Item	M218	M320	M422	M526	M632
Table Size	32.5 x 16"          (830 x 410 mm)	40.5 x 18"        (1025 x 460 mm)	50 x 20"            (1270 x 510 mm)	60 x 24"           (1524 x 610 mm)	71 x 28"             (1805 x 710 mm)
Table T-slot	0.71" (18 mm) x 4		0.71" (18 mm) x 5
Table load max.	1200 lbs  (545 kgs)	1450 lbs   (660 kgs)	1760 lbs   (800 kgs)	2200 lbs   (1000 kgs)	3000 lbs   (1400 kgs)
X axis travel	26" (660mm)	34" (860 mm)	42" (1060 mm)	52" (1320 mm)	63" (1600 mm)
Y axis travel	18" (460mm)	20" (510 mm)	22" (560 mm)	26" (660 mm)	31.5" (800 mm)
Z axis travel	24" (610mm)	24" (610 mm)	27.5" (700 mm)	27.5" (700 mm)	30" (760 mm)
Spindle nose to table surface	4.13 ~ 27.16"        (105 ~ 690 mm)	4.8 ~ 28.82" (122 ~ 732 mm)	4.84 ~ 32.4" (123 ~ 823 mm)	4.72 ~ 32.48" (120 ~ 825 mm)	8.07 ~ 39.57" (205 ~ 1005 mm)
Spindle center to column	19.68" (500 mm)	21.65" (550 mm)	23.62" (600 mm)	27.56" (700 mm)	33.27" (845 mm)
Spindle taper	BT or CAT#40			BT or CAT#40 #50	BT or CAT#50
Spindle speed	8000 rpm (10000rpm OPT.)				4500/6000 rpm
Spindle motor	10 HP	15 HP		20 HP	25 HP
ATC type	Armless type (Arm type is available)				Arm type
Tool  Storage Capacity	16 tools		20 tools	24 tools
Rapid feed X &Y axis	500 ipm (16M)/min			400 ipm (10M)/min	360 ipm (9M)/min.
Rapid feed Z axis	480 ipm (12M)/min			320 ipm (8M)/min	240 ipm (6M)/min.
Cutting feed	200 ipm (7.5M)/min			200 ipm (6M)/min	200 ipm( 4M)/min.
Coolant pump motor	0.3 HP	0.6 HP		1 HP
Table surface to floor	32.67" (830mm)	33.46" (850mm)	32.68" (830mm)		35.63" (905mm)
Floor  Space	86 x 82 x 97"       (2200 x 2080 x 2480mm)	106 x 94 x 99" (2700 x 2400 x 2520mm)	126 x 94 x 102" (3200 x 2400 x 2590mm)	145 x 118 x 100" (3680 x 3000 x 2540mm)	168 x 118 x 113" (4260 x 3000 x 2860mm)
Weight (approx)	6710 lbs  (3050 kgs)	9130 lbs  (4150 kgs)	11770 lbs  (5350 kgs)	15620 lbs  (7100 kgs)	23100 lbs  (10500 kgs)
Positioning  Accuracy	+/- 0.0002" (0.005mm)
Repeatability Accuracy	+/- 0.00012" (0.003mm)

MACHINE FEATURES

• ISO 9001 Quality Assurance.
• Class 7 Bearing for spindle run out less than 0.00015".
• Spindle Motors are 220V, 10HP (M218), 15HP (M320, M422 & M526), 20HP (M632).
• Electronic Vari Speed Spindle Motor with Encoder.
• Hardened & Ground Table / Center T-Slot (Ground for Quick Setting).
• Meehanite Casting to provide maximum rigidity and stability.
• Square Slide Ways on X, Y & Z-axis.
• The axis motors are Directly Coupled to the ballscrews (except M632). It reduces backlash and ensures long lasting accuracy.
• X, Y & Z-axis Metal Telescoping Way Covers.
• 4 Box Ways design on Y-axis for long-term reliability.
• Super Wide Saddle to ensure accuracy movement.
• All axes have high precision, Class C3, pre-tension Ballscrew to ensure high accuracy.
• Hardened & Ground X, Y & Z-axis Way with Turcite B coating to eliminate stick-slip.
• ATC Umbrella Type Tool Changer or Arm Type Tool Changer.
• The tool change time is only 3 sec. (tool to tool).
• CAT 40 or BT 40 Spindle Taper on M218, M320, M422 & M526. CAT 50 or BT 50 on M632.
• High precision spindle is supported by three sets of high precision P4 class angular bearing and to assemble W/- four pieces of clamping collet.
• The spindle is driven by high torque and lower noisy 8YU belt.
• Automatic Flood (M8) Coolant System or Mist Coolant (M7). Specify at time of order.
• Laser Compensation to ensure high accuracy +/- 0.0004" position 0.0002" repeatability.
• Finite Element Analysis (FEA).
• Machine made in Taiwan.

Standard Accessories: Boster (Unclamp) Cylinder. Air gun & spindle air blast. Coolant system. Auto Lubrication system. Halogen work light. Armless type ATC system. Leveling bolts & pads. Telescoping way cover. Power Chain. Manual set. Adjusting tools & box. Rigid tapping. (Fanuc control only) RS-232 interface. Alarm light.

Optional Accessories: Arm type ATC system. Coolant through spindle system. Chip Auger w/-chip car (Screw type chip conveyor). Chain type chip conveyor w/-chip car. 15HP spindle motor set for M218. 20HP spindle motor set for M320 & M422. 25HP spindle motor package for M526. CNC Rotary table package. 10000 rpm package (except for M632). 6000 rpm package for M632. Full enclosure. High voltage transformer.

All Atrump CNC Mills and Machining Centers are powered by

CNC Click here for more information www.centroidcnc.com

 
*** Back to CNC Mills page 1 ***